08 8332 8811
Opening Hours
Monday-Friday: 9:00am - 5:30pm
Saturday: 9:00am - 1pm
Close
Search
Filters
AU$2,295.00
Free shipping
Manufacturer: Schroth
*
*

The Schroth XLT (XtraLighT)  has been developed to be the lightest FHR available. Constructed from Carbon Fibre with a new design to keep the weight down to just 464g (approx 650g including padding and tethers) which on average is an incredible 25% lighter than the previous Carbon Pro model.

 

  • Ultra lightweight. Only 650g including pads and tethers (Medium)
  • Super strong carbon fibre construction for the ultimate in safety
  • New style 'Twist Anchor' fastening system, easier to clip and unclip

The XLT FHR device is available in 20° (Medium or Large) for use in saloon/GT applications or 30° (Medium or Large) for use in most formula and sports cars where the seating position is more reclined.

Medium - 15"-18.5" (38-45cm) Collar size

Large - 18"+ (46+cm) Collar size

Weight : 650g including padding and tethers.

 

FIA 8858-2010 Approved

 

Important note: The FHR device is supplied with a pair of helmet clips (posts). These MUST be fitted to your helmet to allow the correct fitment of the FHR device. The FHR device WILL NOT connect to other types of helmet clip.

 

A small wait time may be needed if ordering a Large device as we generally keep the Medium in stock of Both 20° and 30° varients.

The Schroth XLT (XtraLighT)  has been developed to be the lightest FHR available. Constructed from Carbon Fibre with a new design to keep the weight down to just 464g (approx 650g including padding and tethers) which on average is an incredible 25% lighter than the previous Carbon Pro model.

 

  • Ultra lightweight. Only 650g including pads and tethers (Medium)
  • Super strong carbon fibre construction for the ultimate in safety
  • New style 'Twist Anchor' fastening system, easier to clip and unclip

The XLT FHR device is available in 20° (Medium or Large) for use in saloon/GT applications or 30° (Medium or Large) for use in most formula and sports cars where the seating position is more reclined.

Medium - 15"-18.5" (38-45cm) Collar size

Large - 18"+ (46+cm) Collar size

Weight : 650g including padding and tethers.

 

FIA 8858-2010 Approved

 

Important note: The FHR device is supplied with a pair of helmet clips (posts). These MUST be fitted to your helmet to allow the correct fitment of the FHR device. The FHR device WILL NOT connect to other types of helmet clip.

 

A small wait time may be needed if ordering a Large device as we generally keep the Medium in stock of Both 20° and 30° varients.

Write your own review
  • Bad
  • Excellent